Here’s another piece of terrain for my Rezhev Campaign – a small trench. In Mel’s tutorial, it is called a “slit trench.” I made mine a little wider because the Warlord Germans & the Bad Squiddo Soviets all have bits of the sculpt that overhang the base more than what Mel’s figures had. I really don’t know much about “slit trenches”, but I did have a manager once complain about the slit in my skirt being too high & revealing.
I started with a piece of foam, it’s not XPS or the bubbly kind. It was very rigid. I followed Mel’s tutorial and after shaping the slopes – I cut the model apart to remove the center & then glued it back together.
I covered the foam with drywall spackle & built the trench walls using corndog sticks (which are like wooden coffee stirrers in that they are a little narrower than craft sticks) & added posts made from bamboo skewers.
The front & sides were lined with sandbags I made from Das modeling clay.
Before painting, I seal the model with a coat of ModPoge with some black paint mixed in. This is done to give the piece some strength & to help prevent warping.
All painted up and ready to add basing material.
I think this small trench is a nice compromise to building an entire trench system.
I’m almost ready to start playing the campaign & I can build terrain as I go along. The Soviet platoon is nearly painted – hopefully I can play the first encounter next weekend.